Sovol Zero Auxiliary Part Fan Intake
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redirect the auxiliary part fan to draw air from inside the chamber.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 37
- Wydruki
- 3
- Wyświetlenia
- 276
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Motivation
I wanted a way to draw heated chamber air for the auxiliary part fan instead of cool external air. There is not much space to work with but I managed to fit in a new fan intake that uses the existing fan screws.
Printing
I printed with tree supports for the very top of the intake. I set highlight overhangs to 30deg and used fill tool to select just the highlighted part. See the pictures for reference in Orca slicer.
A brim is strongly recommended. I printed in PETG first and that lasted in a 60deg chamber to print a final copy in ABS.
For extra points add a bit of foam tape to the back to reduce vibrations to the rear plate!
Possible Future Changes
Add a sealing groove to the fan mounting face.
Optimize for ideal airflow