The Ultimate OmniFixo Gridfinity Organizer Case Thingie
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Store your OmniFixo, Pinecil, and Soldering accessories in one gridfinity bin.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's a gridfinity case. It holds a pinecil, omnifixo, and everything you need for soldering. There's also spaces for magnets, but you don't need them really, because the yellow magnets hold them in place
Here's the thing: The clearance for the yellow magnets needs to be VERY precise, because if it's too lose, they will pull out when you lift the omnifixo plate. If they're too tight, they're hard to get out.
I don't know how well your printer is calibrated, so, I suggest printing a test (cut it up with the slicer and print just the circle for the yellow hole) and see if it's too loose or too tight before printing the entire thing.
You can modify it here: https://cad.onshape.com/documents/26e0b3f54863f69b5504783d/w/030e88ffb53b81f360a4b4d0/e/30a94e21f55d6a9289869861?renderMode=0&uiState=695f51474569a081b971b54a
It works with this solder spool: