Samsung SmartTag 2 Case – Optimized for 0.6mm Nozzles & Glow-in-the-Dark PLA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of a Samsung Galaxy Smart Tag 2 case, specifically redesigned to be printed with larger nozzles (0.6mm)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Important Notes:
Assembly: To keep the design simple and printable, this case does not have a snap-fit mechanism. You must glue the two halves together (a drop of superglue works best) for a secure hold.
Glow Effect: As visible on the second photo, the glow effect is quite impressive even when charged only by natural ambient light in a room. However, if you charge it directly with an intense light source, it will glow much more brightly and remain visible for significantly longer, typically for about 2–6 hours.