1 / 1
Churchill Redman Cub V1 lathe Cross slide leadscrew feed nut
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm reconditioning a old pre war Churchill Redman Cub V1 the cross slide nut was worn out so I made a temporary one.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I'm reconditioning a old pre war Churchill Redman Cub V1 the cross slide nut was worn out so I made a temporary one to allow me to make a new one from bronze without the extreme chatter.
I printed it in ABS as used a bit of grease in the thread, works really well but I also need to make a new leadscrew as that is really worn too :-)