Turtle Beach Stealth 700 Gen 2 Swivel Joint
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement part for the Turtle Beach Stealth 700 Gen 2 headset.
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 1877
- Wydruki
- 15
- Wyświetlenia
- 6254
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement part for the Turtle Beach Stealth 700 Gen 2 headset. My headset is for Playstation, but it should work for any 700 gen 2. This was modeled for the left side of the headset, but I would think mirroring the model should make it work for the right side.
I've had the best results printing this with ABS-Like Resin. Standard resin will break within a week from my experience. FDM Plastic printers can not print this part standing up or else the swivel section on top will snap along layer lines.
Edit: added a “thicker” version by reducing the wire hole on the swivel by .5mm