Heat Set Threaded Insert Hole Tester
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Different hole sizes to check proper insert strength M3 to M6
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
I have a bunch of M3 to M6 threaded inserts and each manufacturer seems to have a different outside diameter/profile. Wanted a way to test what hole size would work the best for each without having to clean out the threads from excessive melted plastic. Came up with this model.
It has holes from 5.5mm to 7.2mm in diameter in 0.1mm increments. This seemed to cover all of the insert types I have. It's 100mm X 30mm X 10mm. I've been printing it with 3 or 4 walls and 4 or 5 top and bottom layers to ensure inserts have enough plastic to melt/bite into.
Wasn't too concerned about pull strength, shear, etc... with this model. There's a lot of Youtube videos going over that sort of thing.