Bow Tree Hanger for Hunting V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated revision of my bow hanger for hunting out of a saddle or treestand.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 236
- Wydruki
- 1
- Wyświetlenia
- 1170
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello!
I use a homemade HYS style strap to hand my backpack and bow from a tree while saddle hunting. I wanted a simple hook to hold my bow secure on the tree but still allow easy grabbing of the bow. Other hunting brands have similar products but this is of my design. Large enough to work on all compound bows and traditional if you so choose. I now use a 1/8" amsteel rope to hang my gear. This hook works with a webbing style strap or rope.
Test in a tree on the ground before you trust it in the air!
Hardware:
1x QTY 5/16" - 18 X 1.5" LG SS socket head screw
1x QTY 5/16" - 18 SS locking nut
Printing:
Material: PETG or ASA or other UV resistant filament, I use Atomic PETG + CF which I love!
Layer Height: 0.2mm, print in orientation shown in photos.
Walls: 6
Top and Bottom Layer: 6
Infill: At least 30% cubic or gyroid infill.
Cooling: 0% for best layer adhesion
Supports: Organic supports