Remington 2 typewriter rubber foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement rubber foot for a Remington 2 typewriter.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement rubber foot for a Remington 2 typewriter from 1885.
Print settings:
I used Siraya Tech Flex TPU - 85A Filament
Shore 95A TPU is too hard.
Softer TPU should work as well, but I haven't tried.
85A gives decent grip on a smooth surface.
I fed the TPU directly to the extruder, no PTFE tubing.
This design is based on the leftover original feet of my Remington 2 typewriter. The holes in the frame appear a little tapered, so I made the foot peg a tapered as well. I did not use an internal metal rod as in the case of the Remington 7 feet. I don't know if originally the Remington 2 might have had those, but likely not.
The feet just push into the holes in the machine's metal base.