Balcony Door Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Outside door handle for balcony door
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
The balcony door handle on my Internorm door broke when trying to close the door. So I made a new one.
The screwholes are an exact match for my door. However, as far as I can tell they just screwed it into the doorframe with self tapping screws. So, either do that or remodel the screw holes. I uploaded the freecad file alongside a step file, should make it relatively easy to make changes.
It prints just fine without supports as shown in one of the pictures.
The settings I used to print this are probably quite significant overkill. I printed this from ASA with 4 perimeters, 0.15mm layer height and 50% infill. I did use acetone to smooth out the surface. I believe I overdid it a little on the acetone. I wont be winning a design award for this piece, but I dont hate how it looks, it is functional and quite a lot sturdier than the original handle.