Cen-Tec Quick Connect Bracket for 46mm drill press, flexible dust arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the 46mm brackets for flexible drill press arm, featuring Cen-Tec Quick-connect adapter
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the 46mm bracket for the excellent Makers Manual flexible dust arm for a pillar drill.
The standard bracket comes with a simple hole to connect your dust collector.
I use the excellent Cen-Tec Quick-Connect adapters for all my workshop tools so remixed the existing 48mm pillar drill bracket to add the Cen-Tec adapter.
Three versions of the adapter brackets are provided, one with the hose connector curving away from the drill pillar (as per the existing model), one with it in a straight line, and one with the adapter curving towards the drill pillar. The different versions are provided so you can choose the best version that fits your pillar drill and workshop.
For me with the height of my pillar drill and other tools nearby, fitting the bracket behind the pillar drill with the flexible dust arm coming out at the side made best fit, this meant that the dust hose would curve away towards the rear wall so the inward curving connector is best for me, but your requirements may differ.
Choose the bracket orientation that best suits your pillar drill and workshop.
Print vertically with supports.
Assemble with 35mm M6 bolts and nuts