Gated wye for 4 inch dust collection system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This gated wye connects different branches of a dust collection piping system into one central collector.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 306
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I designed this wye to connect two branches of a wood dust collection system into a central collector. The blast gate can slide to one port or the other, pulling from one of the branches at a time. It's designed to fit 4 inch PVC piping.
The actual sliding blast gate was cut on a cnc router, hence the .DXF file. It can easily be extruded in something like Fusion to create a printable model, just ensure it's slightly thinner than the spacers to allow for smooth sliding. This was originally designed with a spring and steel ball that would stop the blast gate at each port but it wasn't very effective, so it can be left out.