Spool Spindle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a filament spool spindle designed to reduce the torque necessary to unspool filament while printing (on a…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 361
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a filament spool spindle designed to reduce the torque necessary to unspool filament while printing (on a Prusa i3 with 7mm threaded rod spool holder, or any other similar printer) -- give it a shot if you're having under-extrusion issues.
The dimensions were based on Hatchbox spools, but you can easily scale to other dimensions.
As designed, I printed two short pieces for each side of the filament spool. I also included one long solid spindle if you'd rather have a single piece.
Print Settings
Printer Brand:
RepRap
Printer:
Prusa i3
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
100
Notes:
Prints without rafts or supports. I printed 100% infill for strength, but it's probably not necessary.
Category: 3D Printer Accessories