Microscope Slide and Petri dish holder Stage Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert for microscopy stages with a standard K-frame opening. Compatible with standard glass slides and petri dishes.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Share Alike
An adapter for holding glass slides and various sizes of petri dishes wthin a microscope stage with standard k-frame (160 x 110mm) insert.
M4x65mm cap head screws are used to create magnetic rails for the slide holders to attach to the main stage insert.
Each part should be printed upright with support.
Additional components list:
Any thickness but 2mm will sit flush in the sliders
Must be magnetic (non-stainless steel), grade 12.9 alloy steel recommended.
Superglue (optional)
Construction:
Remove support material from parts
Push fit (or superglue) the four magnets into the holes on each slider.
Slide each 65mm screw into into position from the openings on each corner of the main stage insert. They should reach the block in the center of each rail and screw into place as seen in the photos.