Gorilla shelf trash can
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I didn't have room on my shelf for a filament trash can, so I designed this. It can be installed in either direction.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I didn't have room on my shelf for a filament trash can, so I designed this. I was going to print a can, but then I saw the HDX quart cup sitting on my desk. Obviously, it is not designed to hold much weight, but it is great for all those little strings and supports.
It can be installed in either direction. I used M6 x 30mm bolts, washers, and nuts.
Material: LayerWorks Pro PCTG first time. PC-CF the second time (stiffer)
Perimeters: 4
Infill: 15% Adaptive Cubic
Supports: Organic, but you shouldn't need them