Elegoo Centauri Carbon Riser by AdamG
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Super tall and lean riser for the Centauri Carbon. Uses less filament, prints faster, and really lets heat escape.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 63
- Wydruki
- 1
- Wyświetlenia
- 699
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Another Elegoo riser which keeps the heat and dust out of your printer. It prints in 3h30 minutes and only uses 106 grams of filament. M3x10 (10mm long) screws and heat set threaded inserts are REQUIRED for assembly. Holes are designed for RUTHEX M3x5.7 inserts.
I attached gcode for users of Elegoo PLA+ filament. I printed this model with very large (0.28 mm) draft to print it as fast as possible without extreme measures or modifying the printer hardware.
Some filament separation during the printing of the very long horizontal segments is expected and normal; so far they shrank as they cooled every time I have printed this design.
I recommend 15% gyroid infill.