1 / 2
TRX4 Hitch Cargo Carrier
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Various style cargo racks for trx4 that goes into the reciever.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Cargo rack is 3"x2" there is a couple different designs, yes I know the lattice one is not symmetrical. I ran out of patience, haha. There are also two different hitches, so chose the one that provides the best fitment for you. I used two m3x8mm screws to secure my rack to the hitch, then another to pin the hitch into the reciever. You may want to use supports for the "DIG RIG" racks.
