1 / 2
Butterfly valve key
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original design is very good, but the slots were too narrow for my valve.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 358
- Wydruki
- 0
- Wyświetlenia
- 1137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
The key for the butterfly valve. PETG is a great choice for this print. Additionally, you will need 8 M3x30 screws for extra strength.
