Pipette stand - round
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal round pipette stand for 6 pipettes.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Manufacturing instructions
Material: PETG/PP
3D Printer: Any FDM 3D printer with the minimal build plate size 200x200mm
Slicer settings: 4 perimeters to increase strength, support recommended– for stability
Post processing instructions: Remove supports, clean the parts from stringing if needed, check if the parts slides into each other as per assembly instructions.
Assembling instructions
Slide the legs in the stand (it is a tight fit)
Insert the top part of the holder on the stand.
QC procedures
Visual inspection:
Ensure that the surface is smooth, especially parts which were supported by supports.
Sometimes the corners detach during the printing – check if the legs are not distorted
Tolerance inspection:
Check if the legs hold tight in the stand and do not detach when lifted
The top part should rotate freely, but when hold, the stand should not fall down.
Check if the various types of pipettes hold firmly in the stand. You should be able to remove it using one hand easily.