Dune Imperium Influence Tracker V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Things improved: 1) Tolerances fixed 2) Board support to fix the tracker to the board 3) Initial positions enlarged
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
The modified Influence Tracker add-on for Dune Imperium
There are still only 3 parts, the actual tracker body needs to be printed 4 times, the top and bottom are small in comparison and each need to be printed once. Printed with the P1S with standard settings.
Things improved:
1) Tolerances fixed - now you don't need to rasp/file the dovetail joints to get them to fit.
2) Board holders added as top and bottom pieces - stop the Tracker moving around on the board. It should snap to the corners of the board with no problem. The holes are meant only as pilot holes for dowel pins/needles/nails of your preferred or available size to glue in and then stick into the board without causing (any significant) visible damage.
3) Initial positions enlarged - the small cubes now fit more than neatly into their initial space