World's Smallest Sliding Fidget Toy | No Magnets Required | 32 Layers! | 25 mm x 50 mm x 13 mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Many hours of prototyping, pushing FDM to its limits. I have created a fun, accessible linear sliding Micro Fidget Toy.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 359
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction
Hello, all. Thanks for visiting my model page!
I initially started this project with a few simple goals:
Create the smallest linear sliding fidget toy possible with FDM printing. (Using a standard, readily available and inexpensive filament)
Testing the capabilities of the latest gen printer (Bambu P2S).
Ensure the action of the toy is satisfying, repeatable and durable.
Instructions
The fidget toy is comprised of 3 components:
Base [Plate] - Dual purpose - acts as a set of "rails/tracks" to keep the Lid sliding smoothly, and has the insert holes that fit the Main Spring
Main Spring - This component is what facilitates the satisfying yet quiet clicking/sliding feeling. Provides resistance to the user's sliding and naturally keeps the toy together when not in use.
Press the Main Spring into the base plate carefully or squeeze gently using pliers to ensure it's fully seated in the slots.
Lid - This is the final piece of the sandwich, sliding over the top and completing the toy. This component houses the triangular ribs that interact with the spring when sliding the toy between the harmonics of the spring.
When assembling, especially with the skeletonized version, ensure everything is lined up properly before pushing together. It is obviously delicate, and the various overhangs can be bent easily if you are not careful. It should click into a small region of motion about 3mm wide. This is the default position. You can also visually see both ends of the spring compress past the triangular ribs and snap back into place!
Extra Notes/Tips
I printed with 4 walls, 0.2 Standard @BBL P2S (High quality)
Standard PLA
The components are so small that infill doesn't really matter; however, I did do the standard 15%
I print everything flat on the print bed. This means that the Base is normally oriented, the Spring is oriented upside-down, and the Lid is oriented upside-down
In the dozens of copies I've printed, there is a roughly 10% failure rate. For the most part, it prints pretty dang well. It is truly incredible how small I was able to get this. (25 mm x 50 mm x 13 mm). On this note, BE DELICATE. Remember, these components were designed to be as small as possible. That means they are really pushing the envelope in terms of the strength and durability vs minimalism.
What works best for me is to remove them from the build plate carefully, then let them cool completely before assembling. ❄
By fallout, I mean you'll get the occasional stringy, or the pieces will require a tiny bit of filing post-print (with some small hobby files, an X-Acto knife, etc). There are two small overhangs present, but NO SUPPORTS are required. I did experiment with supports on Prusa MK4 printer at my workplace, they worked well to keep things very clean but were a bit tricky to get out, I used metal tweezers.The overhang that sometimes requires some finessing/post-print adjustment is the one on the Lid component.
Springs may break, so I suggest printing a couple extra. They are pretty easy to punch out of the baseplate with a toothpick, pencil, etc if they shear off.
I have included a Base Model, and a Skeletonized Model.
The components are interchangeable; you can use a Base model base with a Skeletonized Model Lid or vice versa. The Base model can be remixed by those who want to try designing a new style themselves.
Thanks for reading! Enjoy, and I hope it works well on your printer(s), let me know!
