Shape Stack - A simple Balancing Game
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — NoDerivatives
Instructions:
I would suggest you print each part except the base 4-6 times each, meaning you should have 4-6 of each part except the base.
Supports are not needed, and I would suggest you print at a higher infill, like 50-100% infill. Print Base especially at high infill.
Rules:
The youngest goes first, take turns by placing one block at a time. (the order of turns continues clockwise from the youngest.)
You may place the shape anywhere (except some places, see below for more rules about that.) if the shape falls after being placed, you lose, if the whole tower falls while placing a shape, you lose, if any other shape falls while placing a shape, you lose, if you somehow manage to make the whole thing fall while placing a shape, you definitely lose.
You may NOT place any object on its top or bottom, only on its side. And you may NOT place shapes two or more wide. See photo for reference on HOW the game SHOULD be played.
First person to let the tower fall (or any piece in general) on their turn loses!
Recommended 1-4 Players - (But that may change depending on your own preference.)