1 / 1
LTT AM4 CPU Case adapted to use DIN 912 M2 × 8 mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model has a hole which allows for the use of DIN912 M2 × 8mm screws for the hinge, instead of the nails.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the base which allows for the use of DIN912 M2 × 8mm screws as the hinge. M3 seemed to be too much, so I went down to 2mm, which fits quite neatly.
You can use the original lid from the LTT AM4 CPU Case. The M2 screw will fit without any modification.
Use a 1,5 mm allen key to install the screw.