1 / 4
Holder for Elegoo Saturn 4/4 Ultra/ 4 Ultra 16K — zdjęcie 1
1 / 4

Holder for Elegoo Saturn 4/4 Ultra/ 4 Ultra 16K

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This screw-on print bed holder was specially developed for the Elegoo Saturn 4.

Ocena
0 / 5
Polubienia
10
Pobrania
242
Wydruki
0
Wyświetlenia
1025
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Print bed holder for draining resin

This screw-on print bed holder was specially developed for resin 3D printers and is used exclusively for securely attaching the print bed so that excess resin can drain off in a controlled manner. It enables clean and efficient work after printing and helps to reduce resin loss and contamination.

The holder is screwed tightly in place, providing a stable hold for the print bed during dripping. Thanks to its sophisticated design, the print bed remains securely in position without slipping. Ideal for workshops, hobbyists, and professional environments.

Printing settings (FDM):

Material: PLA, ABS, PETG

Layer high: 0,20-0,24

Infill: 70-100%

Nozzle: 0,4mm

I recommend printing it with an FDM printer.

Tagi