Spoil board for Genmitsu Cubiko CNC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cover with holes to fit over the aluminum base of the Cubiko desktop CNC. Gives your drill somewhere to go.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 92
- Wydruki
- 1
- Wyświetlenia
- 276
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
Print using whatever, slips over the build plate, screw in your clamps as per usual.
EDIT: Added a circuit board clamp for 6x4 sized boards in the same style, there are a few notches on either end to be able to attach something to do probing, A bit of metal with a hole in it, use a continuity tester to make sure there is contact. I used a bit of double sided circuit board and soldered both sides together and ran a line of solder at the contact point.
EDIT2: Added 2mm version of the spoil board and a circuit board holder that is symmetrical all around.