Modular Rat & Rodent HQ - Customizable Tunnel / House System (100mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular 100mm (inside) rat tunnel system. Multi-level HQ, no supports, PETG/PLA ready.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
Description:
Give your rats or rodents this cool playground with this fully modular "Headquarter" system! Whether you want to build a simple straight run or a multi-level labyrinth, this system allows you to expand and reconfigure their habitat.
I designed this with my son's two rats in mind, focusing on their specific needs and size. However, I assume it should also fit perfectly for mice, guinea pigs, gerbils, degus, octodons or hamsters.
Technical Specs:
Internal section: 100mm x 100mm.
Wall thickness: 5mm.
windows holes: dia 8mm
Safety: Parts connect via an internal clip system hidden within the walls, ensuring a smooth interior surface that won't snag paws or tails.
More extensions and new modules may be released in the future. I’m happy to hear any ideas or feedback you might have! :-)
Included Parts:
Regular parts:
Straight Block: The standard section for main runs.
Half Straight Block: For adjustments, often necessary depending on your custom layout.
5 mm spacer: For adjustments, often necessary depending on your custom layout.
90° Curve: turn for cornering.
Upward/downward 90° level change block to create multi-level skyscrapers for your pets. They are designed to be mounted together:
block to go up.
block to go down.
The "X" Crossroad: A 4-way intersection for the hub.
Connectors:
Clip with tolerance: Might be required for the top parts.
Clip without tolerance: Zero tolerance, fits for the sides.
Clip for 5 mm spacer.
RELEASED 12/01/2026 -> Balcony
RELEASED 14/01/2026 -> 80mm SAS and 1/2 SAS
Round-edged parts:
!!! WARNING !!!
! Experimental Parts ! with 5mm radius fillets (rounded edges) are NOT TESTED YET (I had the idea only after I printed all my parts...). WARNING: These specific modules are designed to be used as 'Top Parts' only. Do not use them as base or intermediate levels in a multi-level assembly, as the parts above require the full, non-rounded edges to rest on for proper structural support.
Straight Block with filet
Half Straight Block with filet
5 mm spacer with filet
90° Curve with filet
Downward 90° with filet
"X" Crossroad with 1, 2, 3, or 4 filets.
RELEASED 12/01/2026 -> Balcony with filets
RELEASED 14/01/2026 -> 80mm SAS and 1/2 SAS with filets
For parts where it's feasible, printing on the 'U' side is recommended. Please note that the 90° Curve and X-Crossroad might require supports at the base, specifically for the 5mm fillet area.
Print Settings (Tested on Prusa Core One):
Printer: I printed with Prusa Core One.
Material: PLA.
Infill: 15% (Grid or Gyroid recommended for strength).
Supports: NO SUPPORTS NEEDED for all standard parts. Every part is designed to be 3D-printing friendly. For some of the round edge parts, maybe.
I recommend for half Straight Block and 5 mm spacer to rotate and print on the U face in the slicer.
Testing & Results
I have printed and tested every standard part, and they fit together perfectly. Please note that this excludes the versions with 5mm fillets (rounded edges), which are currently untested.
Note: You might notice an "ugly stripe" on the brown half-straight block in the main picture. This was due to a temporary filament snag on the spool during the print, but the part remains fully functional, so I decided to keep it !
Enjoy ! :-)
Find it on Thingiverse -> https://www.thingiverse.com/thing:7268462/files
RELEASE V2 21/01/2026
Take a look at V2 ;-) ->
