1 / 4
Fruit/Citrus Juicer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A citrus juicer that feeds directly into a water or soda bottle.
- Ocena
- 0 / 5
- Polubienia
- 99
- Pobrania
- 260
- Wydruki
- 2
- Wyświetlenia
- 1490
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (107)Powiązane
You can screw this on the top of a PET bottle and when you use it, the juice will flow right into the bottle.
- fits PCO1881 type bottles (like diet coke).
Settings:
- any filament should work, but PETG, or another foodsafe and strong-ish material. PETG also holds up to temperatures better, so it should be fine in a dishwasher, although that I have not tested
- do not use supports- this model is printable without supports. Adding supports will only increase the possibility of plastic scraps getting in your juice, and I don't think many people enjoy drinking plastic
- REMOVE ALL STRINGING! You may also want to fine tune your retraction settings to prevent excess stringing. This also will only increase the possibility of plastic scraps in your juice
- higher infill and more perimeters may be helpful, especially if you are using a weaker material. You do not want your juicer breaking when making juice.
- ≈0.2mm layer height
The gcode provided uses my settings for PETG, on a Prusa i3MKS+
This was my first model designed from scratch, using Fusion360, hope you enjoy :).