Kid Buu (majin) Dragon Ball Z
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Figure of the Majin buu from dragon ball z powering up his super attack against Goku
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 160
- Wydruki
- 0
- Wyświetlenia
- 480
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Design Concept
The model captures the iconic pose of Kid Buu from the Dragon Ball series, holding a sphere as if preparing an attack, highlighting the character's menacing power.
Purpose
This model is ideal for anime fans, collectors, or as a decorative piece for enthusiasts of the series.
Printing Suggestions
Print with a layer height of 0.1mm to ensure fine details are captured. High infill percentage (around 20-30%) is recommended for structural strength, especially in the raised arm and sphere. (This model was printed with 15% infill at a 0.2mm layer height on a ***** lab P1S 0.4mm nozzle)
Assembly Instructions
The model seems to be a single piece; however, ensure that the supports are carefully removed not to damage the detailed sculpture. (Supports were hard to remove so could potentially use some twerking)