Supertramp Camper Handle Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A comfortable grip that insulates the hot or cold metal of Supertramp camper handles.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This grip design is specifically for Supertramp camper metal handles. It has a nice soft cushy feel due to the 10% infill. It has a slit in the back that allows it to be attached around the handle without removing the handle. It does take some effort to get it wrapped around the handle, but it will stay in place without any adhesive or mounting hardware.
This file is printed with TPU (Shore 95A) using a 10% gyroid infill and no supports. Print it in the vertical direction on a steel sheet plate using glue stick. If a textured plate is used, the part will typically fall/fail during the build due to a week bond and little area adhering to the build plate.