1 / 7
DJI Caddx Vista on a FMS ASW-17 aircraft — zdjęcie 1
1 / 7

DJI Caddx Vista on a FMS ASW-17 aircraft

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This print makes it possible to mount a DJI FPV camera on the curved upper part of the plane.

Ocena
0 / 5
Polubienia
3
Pobrania
46
Wydruki
0
Wyświetlenia
499
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

Print in TPU or PETG for the mid part that is in contact with the hot Vista unit.
Print the mid section upside down with the curved surface facing up. Support is required, but that is easily broken off.
Print with 0.1mm layer height, for the best finish.
Everything fits perfectly, Requires only a few long M2 & M2.5 Screws.