1 / 2
Boruit V10 Friction Fit GoPro Style Mount — zdjęcie 1
1 / 2

Boruit V10 Friction Fit GoPro Style Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Friction fit mount for Boruit V10 with GoPro attachment.

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
36
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Made this to use as a helmet flashlight with my GoPro helmet mount (straps). There's enough space to press the buttons even if you have larger fingers. Primarily for forward light usage, though the colored LEDs are not covered. I mountain bike (enduro), and this mount has held strong in both PLA and PETG alongside general road riding. I use this more frequently without my helmet; there is no space to charge while mounted. I'll usually take it out to charge since I leave my helmet elsewhere.

Print vertically, with the longer clamp at the bottom as pictured. This alignment makes the clamps stronger.

When inserting the V10, gently pull up one end of the thinner clamp and push the light through. It will self-align, and you can press all the way through until it reaches the end.

Alternatively, you can align the V10 and press all the way through, but that risks the rubber buttons and port cover being caught on the edges.

Printed with PLA or PETG (Default settings)

20-35% gyroid infill

0.2mm layer height

2 wall loops

tree supports

Printed with Bambu Lab P1S