Case for XY6509X Power Supply USB-C
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple case for a XY6509X Power Supply for either a barrel jack or a USB-C PD3.1 decoy.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A case for the XY6509X power supply obtained from aliexpress (original item: https://aliexpress.com/item/1005009041300452.html)
It uses these components:
Multimeter type jacks: https://aliexpress.com/item/4000301227296.html
Barrel jack: https://aliexpress.com/item/10000000716763.html (Female Jack 10 type1)
Personally I bought this supply: https://aliexpress.com/item/1005009860657329.html (only adapter, 48V 2A)
For the USB-C version I use this small PD3.1 decoy chip (high voltage version): https://aliexpress.com/item/1005012374282652.html and 2 M3x16 countersunk screws with nuts and washers to secure the decoy board with the printed bracket.
If you want to use different connectors I've also included the step file without the holes for the connectors
For assembly you'll need 3 M3 heat set inserts and 3 M3x~10mm countersunk screws.
Printed in PLA, I've added modifiers for the heat set insert holes to increase perimeter count around the inserts. See attached 3mf file and Screenshot for reference.