1 / 6
Replacement Light Cover for AEG Cooker Hood (Transparent PETG) — zdjęcie 1
1 / 6

Replacement Light Cover for AEG Cooker Hood (Transparent PETG)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

replacement diffuser/cover for ~20-year-old AEG cooker hood

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
52
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

One of the light covers on my ~20-year-old AEG cooker hood broke, and I couldn’t find an original spare part anymore. So I modelled a replacement diffuser/cover and printed it in transparent PETG.

This part is meant to replace one single light cover and uses the same screw positions as the original (see photos). Printed in clear PETG it lets plenty of light through while protecting the lamp again.

Print recommendations

  • Material: transparent PETG (recommended for durability and a bit more heat resistance than PLA)

  • Layer height: 0.16–0.20 mm for a nicer translucent look

  • Walls: 3+

  • Infill: low/medium (not critical)

  • Print flat as oriented in the STL for best surface quality

Notes / Disclaimer

  • Unofficial replacement part, not affiliated with AEG

  • Please measure/check fit before installing (older hoods may vary slightly)

  • I printed mine in PETG and it works well, but I can’t guarantee compatibility with every AEG model or long-term heat exposure near the lamp

Tagi