Skinny Stack V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable hardware storage using empty spools. These are specifically Jayo spools but I have seen others use them.
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 569
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Empty Spools = Stackable hardware storage
I used empty Jayo spools (many others use these - and the holes align with even more) to create the base for a stackable hardware storage solution. This is V1 and there will be changes. The M3x6mm will screw past the insert into the plastic, this is ok and makes the bin have tension when opening. Allow the insert to completely cool before attempting this.
Hardware I used;
2 x M3 Heat inserts (must reem holes slightly) - Can use M4 into plastic as well.
2 x M3x6mm
2 x M3x8mm as the bin stops in the side holes.
2 x M3 nuts also part of the bin stops.
Enjoy!!