1 / 1
18-20mm belt buckle to fit thicker belts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
18-20mm belt buckle to fit thicker belts
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
18-20mm belt buckle to fit thicker belts.
Settings | Value |
|---|---|
Infill | 25% (adaptive cubic) |
Perimeters | 2 |
Layer Height | 0.15 mm Speed |
Material | PETG / PLA |
Supporting Material | only overhangs / organic |
Comments | |
Ironing | no (not needed, but creates a cleaner surface) |
Feedback is welcome.
Share your makes!