Hexcopter 400mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a hex that is suitable for 22XX series motors with up to 6in prop.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
i had a ZR250 quad and wanted a hex but couldn't find much, so i decided to try and make a fully printable frame and arms. every thing is to be self threading using M3 X 10mm. so far this is completely work in progress and im still printing and refining. ultimately is will have mounts for run cam that is extended foward to reduce props in the image, dual PDB with 30.5 pattern, FC with 30.5 pattern, mount holes for dual Matek i2c-ina-bm current sensors, a hard mount for m10 gps, opening to mount xt60 (will have multiple options in the future). testing is PLA 25% infill 4-6 walls and .15 layer height. absolutely feel free to make the design all your own.
1/24/26
added new design for the arms that use's 10mm rod to cont arms so you can make this any size you want, also added bolt pattern for APM/PIX old mount