1 / 1
Gemmy Groovin Characters "Leg Spinning Knob" — zdjęcie 1

Gemmy Groovin Characters "Leg Spinning Knob"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Part for the 2004-2005 Gemmy Groovin Character Line

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
45
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This part is the Leg "Spinning Knob(s)" used in the Gemmy Groovin Characters, This part is a press fit onto a .100 thou shaft, it should be relatively firm and shouldn't have any side to side wiggle. Print with layer lines supporting the shaft which goes into the "mating" plastic joint. I recommend 100% infill, with supports.

This model is free to use but is not to be traded/sold/exchanged.

Tagi