BC-250 ATX PSU Bazzite Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BC-250 Case that uses a standard ATX PSU.
- Ocena
- 4,5 / 5
- Polubienia
- 64
- Pobrania
- 1095
- Wydruki
- 3
- Wyświetlenia
- 8392
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
BC-250 Case that uses a standard ATX PSU.
Requires 8 coarse thread PC screws, 4 for the PSU, and 4 to hold the case together.
Leave the IO shield bracket on but remove the tiny metal bracket on the front for this case.
The power button is a 16mm latching type power button. https://www.amazon.com/dp/B07RFPKSKY
The USB hub is a anker 4 port. https://www.amazon.com/dp/B07L32B9C2
Fan is Artic P12 Pro. https://www.amazon.com/ARCTIC-P12-Pro-Powerful-600-3000/dp/B0DJDC74BP
I have also included the step files so this can be modified however you see fit.
Print with 2 walls 10% or so infill. I would suggest HTPLA, PETG, or ABS for filament.
Link to BC-250 Discord: https://discord.gg/8eZfFWhczz
The fan mount is of Nexgen3D design located here: