4 Magazine Vertical Stacking System v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of my previous remix of a vertical AR magazine rack system.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
It uses these magnets to attach the rack to your gun safe or cabinet.
Fits most mags. I've tested PMags, Hexmags, MFT mags, standard GI and M&P15-22. THRIL mags do not fit.
Supports aren't necessary is your bridging is decent. The inner magnet mount hole is designed to be support less. Print at 0.2 layer height.
Increase the walls for the magnet mount area. I would suggest 4 or 5 walls for the whole print.
Also, you may have to orient the piece at 45 degrees on your baseplate.
If you like what I'm doing here, please consider making a small donation. These funds help me (in part) maintain my volunteer efforts in Search and Rescue. As an Amazon Associate, purchases made using my link also help support my Search and Rescue efforts.
I haven't printed these yet but there isn't any craziness in the design that will cause problems.
Use the repeating-base segment for the bottom-most piece and all middle pieces. Use the Cap piece at the top of the vertical stack.