1 / 3
Printable Sanding Wedge — zdjęcie 1
1 / 3

Printable Sanding Wedge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modified Sanding Wedge by Ralf Hörhager.

Ocena
4,5 / 5
Polubienia
208
Pobrania
671
Wydruki
1
Wyświetlenia
1792
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Sanding wedge based on model by Ralf Hörhager and its remix by Citrionyx. Model is modified to have smooth bottom surface, so that thin sand paper may be used safely. I printed the wedge scaled down to 80pct just because that was what I needed. You may need to shorten the screw in your slicer, depending on size of the wedge you print and thickness of sand paper you use. 

Printed from PLA, no supports, the screw has dense infill and increased number of perimeters. Printed on Prusa MK3s.

Tagi