1 / 2
Libernovo Omni Armrest Slider Tension Mod
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacers to increase the Omni's armrest sliding resistance
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 529
- Wydruki
- 1
- Wyświetlenia
- 1907
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 9)Remiksy (0)Kolekcje (13)Powiązane
Spacers to increase the Omni's armrest sliding resistance - one for the right, and one for the left. They're different since the left needs to accommodate the cable for the electronics.
Recommended printing settings:
I used PLA+ but anything rigid should be fine.
0.2mm layer height
3 perimeters
no infill
no supports