4" crt roku housing with space
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case I made for a 4" crt off amazon.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
This is a case I made for a 4" crt off amazon. I have space for a battery, speakers, and whatever else you might need. Here are the things I used in mine:
https://www.amazon.com/XMSJSIY-Computer-Speaker-Speakers-Notebook/dp/B0D7L5JQJC/ref=sr_1_2?sr=8-2
https://www.amazon.com/Fancasee-Replacement-Female-Connector-Adapter/dp/B081V3841B/ref=sr_1_3?sr=8-3
https://www.amazon.com/Roku-Express-Streaming-High-Speed-controls/dp/B0BCH5H2R3/ref=sr_1_4?sr=8-4
https://www.amazon.com/zdyCGTime-RCA-3-5mm-Auxiliary-Frequency/dp/B0DRNN9VM9/ref=sr_1_10?sr=8-10
Assembly is pretty straight forward. put the crt in with wires coming out the back, then put the crt backplate on with 6 m3 by 12 screws. put the electronics in the back with the speakers facing towards the back on the case backplate ( I used double-sided tape) so they don't interfere with the crt geometry. Then wire everything up !Force the back on with the roku on top of the main housing. And viola! You have a tiny 4" crt roku watching experience. If additional instructions are needed feel free to contact me!
(Lighly based on a model on thingiverse)