Dell WD19S Dock monitor tube mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your dock to a monitor stand tube for a cleaner workspace
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Print Settings
.25mm first layer.
.2mm layer height.
5 walls, 30% infill.
I'd recommend PETG minimum.
No supports required.
Files & BOM
This is designed for a 35D monitor tube, however I’ve included the F3D files for if you need to modify it to suit different tube diameters. If you don’t have access to Fusion and would like a clamp made for a different diameter drop a comment and I’ll make it for you.
2 * M5 Nuts (Prevailing Torque nuts are best)
2 * M5 x >12mm SSCH/SSBH
2 * M3 x 4.5D x 5L Heatset Inserts
2 * M3 x 8 SSCH
Assembly
Install M3 x 4.5D x 5L Heatset inserts and M5 Prevailing Torque Nuts into the Clamp Base.
Bolt the Dock Holster to the Clamp Base using the M3 x 8 SSCH. The screws should sit flush with the inside face of the dock holster.
Feed the M5 bolts through the clamp clasp.
Place the assembled dock around your tube, and screw the clamp clasp on to complete the assembly.
Dell Dock should be a friction fit into the mount.