Skullcandy Crusher Evo/540 Sliding hinge replacment part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the replacmentpart of the Skullcandy Crusher Evo or 540 Sliding hinge
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Open Community License v1
This is the replacmentpart of the Skullcandy Crusher Evo or 540 Sliding hinge. It's made to keep al original functions, like slide adjusting the size and swiveling, rotating and even locking and folding the cups.
It's made in one part for ease of instalation and printing. The instalation is easy and straight forward. It takes a bit of force to snap and slide it on because I made an endstop to keep it from sliding off. Make sure to guide the cable of the headphone throught the slot on the outside.
Made this for a friend and don't have pictures so I present lazy yet informative printscreens from the slicer.
The model is made to be printed upside down on the open end standing up with the hinge part in the air. Just like the lazy ''renders''.
I printed it solid with 5 perimeters and chose PBT as the material, because its really tough, has great layer bonding and flexes a bit. It will work in PETG or ABS to if you can get good layer bonding. Nylon or a high hardness TPU would work best I think.
Print parameters:
Materials
PBT > PA/TPU > PETG/ABS
Walls 6 (makes it solid)
!!! Raft is required !!!