Prusa MK3/MK3S Timelapse Clock Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Timelapse Clock Holder for Prusa I3 MK3S. It is fixed on the X axis.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 674
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a Timelapse Clock Holder for Prusa I3 MK3S.
It is fixed on the X axis.
The button is designed by Stebo : https://www.thingiverse.com/thing:1570116
Print Settings
1 x TimelapseClockHolder1 : Layer:0.20mm Raft:no Support:yes Infill:100%
1 x TimelapseClockHolder2 : Layer:0.20mm Raft:no Support:no Infill:100%
1 x TimelapseClockHolderButton : Layer:0.20mm Raft:no Support:no Infill:20%
1 x TimelapseClockHolderButtonCap : Layer:0.20mm Raft:no Support:no Infill:100%
Accessories
1 x m6x45mm Hex Head
1 x m6 jam nut
2 x m4x8mm SHCS
1 x m2x12mm SHCS
1 x m2 jam nut
The clock must be 90mm in diameter and 20mm to 40mm deep.
Mounting
Mount the clock into TimelapseClockHolder2 with m2x12mm SHCS and m2 jam nut.
Fix the TimelapseClockHolder1 on the X axis with the two m4x8mm SHCS ; threaded holes already exist on the X end idler. It is useless to squeeze hard.
Put the m6 screw in the TimelapseClockHolderButton.
Put the TimelapseClockHolderButtonCap on the TimelapseClockHolderButton.
Insert the TimelapseClockHolder2 on TimelapseClockHolder1 and fix them with the TimelapseClockHolderButton and the m6 jam nut.
Print instructions
Category: 3D Printer Accessories Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Filament: BQ PLA Turquoise