1 / 3
Aftermarket M1967-style Magazine Pouch buckle replacement — zdjęcie 1
1 / 3

Aftermarket M1967-style Magazine Pouch buckle replacement

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replacement buckle for M1967-style mag pouch which is commonly seen on ALICE gear setups.

Ocena
0 / 5
Polubienia
2
Pobrania
6
Wydruki
0
Wyświetlenia
45
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution

It was originally made for a third-party copy of the M1967 mag pouch.

Print Settings

The following print settings for ultimaker cura was used.

Layer height: 0.12mm

Infill             : 100%

Wall line and the others    :  Default profile settings

Orientation (male and female buckle): It is laid on it side, two saw-toothed legs facing upwards, the back of the buckle making a 30 degree angle with the build plate.

Remarks

  1. Make sure to sand the rough edges and artefacts so it operates smoothly.

  2. I printed it with PLA and it works well so far (2 months). Feel free to test with other materials.

  3. Female buckles are not tested, print and use with caution.

  4. Feedbacks welcome! (Do tell me if it works on the authentic LC-1 Small Arms Case Pouch)

Change Log

  • 2026Feb05: Adjusted male buckle fork width, added female buckle and its buckle cap.

  • 2026Feb07: Fixed female buckle dimensions so it fit better

Tagi