1 / 1
Ikea PLATSA mountingplate for "MK3S+ ESP32 Cam Camera Mount"
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An additional baseplate for the "MK3S+ ESP32 Cam Camera Mount" by @detlassnake_289499
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
First, I mounted the ESP32 camera on the printer using the “MK3S+ ESP32 Cam Camera Mount” by @detlassnake_289499. After being dissatisfied for a long time, I wanted to mount the camera on my PLATSA enclosure, so I developed the base plate for this purpose.
Printing recommendation:
Material: PETG
Layer height: 0.3 mm
Required material:
2 pieces -> 5x10 screws
4 parts from the model "MK3S+ ESP32 Cam Camera Mount" by @detlassnake_289499
The .step file is included for modifications.