1 / 5
D&D Pinball Flame Torch Flasher Cover, Fits Stern Spike 2. — zdjęcie 1
1 / 5

D&D Pinball Flame Torch Flasher Cover, Fits Stern Spike 2.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a 3D printable replacement for the stock dome flasher covers on a Stern Spike 2 Machine. This is specifically…

Ocena
0 / 5
Polubienia
5
Pobrania
36
Wydruki
0
Wyświetlenia
117
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

This is a 3D printable replacement for the stock dome flasher covers on a Stern Spike 2 Machine.

This is specifically designed for Sterns Dungeons & Dragons Pinball machine but will fit any Stern machines with the same flasher cover design.

The torch model is printed in a solid filament while the flame model is printed in a translucent material.

The torch base and flames just slide into each over and are held together with friction, the torch model has a small rim so the flame model just slides all the way down until it rests against the rim.

The flame model used was made by DOT-Nobody and can be found here: https://makerworld.com/en/models/1726864-hollow-flame-for-torch-of-bas-matjes?from=search#profileId-1833653

Tagi