Top handle for camera rig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A top handle for the camera rig: https://www.printables.com/model/373143-smartphone-camera-rig.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
I like the camera rig for smart phones https://www.printables.com/model/373143-smartphone-camera-rig very much. But it lacked some features I wanted to have. Unfortunately the top handle from https://www.printables.com/model/111264-smartphone-rig-top-handle-feet-and-extended-bar-wi did not fit so I made up something similar myself. For the grip I used the existing grip of the rig and scaled the stl with minimal effort directly in the slicer by positioning it "in" the build plate.
This is the second version of the handle because the first one showed some delamination over time. The handle was printed in PLA. If someone wants to adjust it, feel free to do so. I also include the FreeCAD files here.
The version shown was printed with 0,2 mm with gyroid infill and support for the overhang on the rim. Perhaps rotating the handle 90 degrees can improve stability further.