DeWalt 18V LED Light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LED Light for DeWalt 18V Battery
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This battery driven Light is a usefull tool for lighting dark corners.
All parts are easy to print. For the enclosure parts you can use PLA. For the Parts that have contact to the heatsink PETG or ABS would be better because of the LED heat distribution.
For the assembly of the light, M3 screws(6mm or 8mm) and threaded inserts are required.
With an NE555 based circuit a PWM brightness controll is possible.
You can find the electronics shematic in the additional files. Use a 5cmx7cm PCB.
You can use any 18V light source (e.g. COB-LED). The files are made for an 50x100 mm aluminium heatsink.
When using an LED with an lower voltagerange, use an Buck-Converter to adjust the Voltage.
[If you use an converter with CC function you can regulate the Brightness over the current potentiometer.]