FD3S RX7 brake air Air duct RH – compatible with Mazda RX-7 (1999)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scan-based 3D model shared for restoration/fitment reference. Not an OEM part.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 73
- Wydruki
- 1
- Wyświetlenia
- 323
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a community upload of an replica 3D model of an air duct, shared for restoration and fitment reference.
Compatibility
Mazda RX-7 (1999-2002) — please verify your exact variant before printing (mount points/geometry may vary).
Disclaimer
This model is not an OEM part and is not affiliated with, sponsored, or endorsed by Mazda. “Mazda” and “RX-7” are used only to describe compatibility. Use at your own risk and verify material suitability, clearances, and fitment before use.
Feedback
If you print/test-fit this, please comment with your RX-7 variant details and any fitment notes. If there’s interest, I can release a print-optimized redesign (stronger walls, simplified geometry, easier-to-print splits).